Home > Dual Boot > Dual Boot W7 (internal HDD) W2008 (e-sata)

Dual Boot W7 (internal HDD) W2008 (e-sata)

Dmitry

Dmitry Postrigan on October 11, 2007 2:06 pm any chance to be able to add a optional raid controller driver to see my raid drives? Tks!UtanWednesday, 14 September 2011 22:27:28 UTCGreat help. I've got it setup and working nicely now. You can check that by running BIOS Setup and looking for things like "DCO" or "HPA". have a peek here

I was able to install it on my Fujitsu netbook, only if I set the SATA to IDE mode. PLS HELP R?mak???a saysSeptember 10, 2012 at 2:35 pm For people reporting broken link to ZIP file from step 2:1. Is it possible that my external HDD does not have the posibility to boot? windows (which must be holding some kind of pointer or link to the VHD) now says the device is vhd=[E:]VHDscrysis0.vhd.

Michael saysSeptember 3, 2012 at 10:25 am the link for the WAIK Files is not working, same link as in comment #109 aneesh saysAugust 31, 2012 at 9:27 pm this link ECHO Written by sfinktah for sambul61, feedback to http://reboot.pro/15815/ ECHO Some code written by Dan Stolts. After running this app. Installation & Setup Dual Boot - XP on First Drive (SATA) Win 7 Second (IDE)Greetings All, I am running XP on a SATA HDD.

IS THERE ANY KIND OF FACTORY JUMPER OR A FIRMWARE UTILITY OR SOMETHING TO RESET THIS DRIVE? solved Windows 10 says internal hard drive is external. However, I left click, right click, still dun have the option to do that. If the windows installation media is in the drive, you can safely remove it for this step.Gary DavisWebguild.comgardavisThursday, 22 September 2011 20:45:15 UTClooks pretty clean.

is licensed under aCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.Additional information is available athttps://askleo.com/creative-commons-license/.Terms Ads vs. Reply deb December 16, 2014 at 1:35 am i am trying as saying as above but after finishing it it's Say's there is no enough memory. When I start the installation from either the Windows Files folder or a DVD it still says that I can't install on a USB drive.I'm using a hard drive in an http://www.tomshardware.com/answers/id-2158808/internal-external-dual-boot-windows-hard-drive.html Virtual disk should require a NTFS disk that should not be compressed or encrypted.Heck my D:\ drive is compressed but D:\vm is has compression attribute unchecked so that mkdir should've created

Then, continue normally with the process of running the "installer.cmd" file as an administrator and all the other steps described in this blog.In the end, when the boot from the external As to Visual BCD Editor, it fixed an offline BCD Store for me, so it sounds like a comprehensive tool that needs some practice.Pls read the Dif VHD part of Create Happy New Years! This seems to be the Windows 8 boot manager that you'll see if Windows 8 Developer Preview is the default.

Thanks for the tutorial. https://arstechnica.com/civis/viewtopic.php?f=15&t=1203279 Rumanoid saysJanuary 5, 2014 at 11:06 pm HELP PLEASE!!!!! Reply Ankit kumar September 23, 2014 at 5:09 am when I create new volume can I recover previous all data.I want not format local disk by creating new volume. I have a laptop that has a password protected BIOS.

Then suddenly it hang in the middle of "Moving Partition" operation. navigate here i have to reformat the drive and start from scratch every time. The computer died and I am trying to install the hard drive on a different computer. thanks, jasi

JaSi on January 7, 2008 6:49 pm Спасибо!!! Очень выручает эта прога. Часто приходится сталкиваться с такими проблемами по роду деятельности

Servise on January 8, 2008 4:12

I tried your tool (after installing WinXP on it, which took me about 1 hour and a half) and the window read : Reported capacity : 10,005 MB Factory capacity : No data will be affected by this operation, but I cannot provide any guarantee. I was given a brand new hard drive which did read 60 gigs when I first installed it as a secondary drive. Check This Out Morocco saysJune 9, 2013 at 6:54 am Heads up everyone if you experience my problem, I solved it because I missed the "Run installer.cmd" as admin.

That was a 500 Gbyte expandable VHD formatted and compress with NTFS. Installation cannot proceed."Anyone have any ideas?Alex LongThursday, 15 September 2011 09:50:00 UTCSH> Darrix - double check your location and ensure you have enough room for the VHD to expand? BCDEDIT output: Windows Boot Manager -------------------- identifier {bootmgr} device partition=C: description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {1dcb6f56-966f-11de-b54a-ed2d69a068ba} displayorder {165a98c1-dc6d-11de-975c-a5780e7e3fcb} {current} toolsdisplayorder {memdiag} timeout 6 Windows Boot

If nothing helps, try on another computer.

I think that would quirck the boot menu completely and brick the boot, am I right?Thank you everybody! The way it worked for me - by adding NeoGrub entry in EasyBCD installed to Win7 on VHD.Updated the Tutorial. In the screenshot above I haven't touched anything, yet. Thanks for this product, it solved my issue when 10 other programs and two days of searching around couldn't do it!

Arvin Bautista on July 23, 2008 4:45 am I

Not all IDE/SATA adapters are supported though. Windows kept asking me to format.. Should I start using an 3rd party bootmanager? this contact form After reboot..

Is OS necessary to be installed on the HDD first before running the tool and is there any chance to get the data recovered from the other HDD. LorandThursday, 15 September 2011 22:38:57 UTCHi Scott - great post I was glad to read that Windows 8 supported boot to vhd - i'm a massive fan. Only windows 7 is here which is not loading correctly. Any clues?I remember back when I was messing with installing Windows Server 2008 R2 M3 I used this method.

Thank-you. Then, don't use the Boot Menu, it never works. WHAT IS MY PROBLEM??? Thanks

Dmitry Postrigan on February 11, 2008 7:15 pm Fik: According to your description, the hard drive is most likely failing and needs to be replaced… That's all I can

I downloaded this tool and I am getting a message when I click on the desired hard drive, that there are two devices on a single channel. Edited by sfinktah, 17 November 2011 - 05:00 PM. Yes, I usually boot VHDs saved on an internal hard drive (34 votes [37.78%]) Percentage of vote: 37.78% Yes, I usually boot VHDs saved on a USB drive or thumb (10 but I can't boot it.

to the first or to the second one?what will happen to my data? You could probably recreate the BCD with BCDEdit, but I'm surprised it erased ries.